curl / Development / Contribute

Contributing to the curl project

This document is intended to offer guidelines on how to best contribute to the curl project. This concerns new features as well as corrections to existing flaws or bugs.

Learning curl

Join the Community

Skip over to https://curl.haxx.se/mail/ and join the appropriate mailing list(s). Read up on details before you post questions. Read this file before you start sending patches! We prefer questions sent to and discussions being held on the mailing list(s), not sent to individuals.

Before posting to one of the curl mailing lists, please read up on the mailing list etiquette.

We also hang out on IRC in #curl on irc.freenode.net

If you're at all interested in the code side of things, consider clicking 'watch' on the curl repo on github to get notified on pull requests and new issues posted there.

License and copyright

When contributing with code, you agree to put your changes and new code under the same license curl and libcurl is already using unless stated and agreed otherwise.

If you add a larger piece of code, you can opt to make that file or set of files to use a different license as long as they don't enforce any changes to the rest of the package and they make sense. Such "separate parts" can not be GPL licensed (as we don't want copyleft to affect users of libcurl) but they must use "GPL compatible" licenses (as we want to allow users to use libcurl properly in GPL licensed environments).

When changing existing source code, you do not alter the copyright of the original file(s). The copyright will still be owned by the original creator(s) or those who have been assigned copyright by the original author(s).

By submitting a patch to the curl project, you are assumed to have the right to the code and to be allowed by your employer or whatever to hand over that patch/code to us. We will credit you for your changes as far as possible, to give credit but also to keep a trace back to who made what changes. Please always provide us with your full real name when contributing!

What To Read

Source code, the man pages, the INTERNALS document, TODO, KNOWN_BUGS and the most recent changes in git. Just lurking on the curl-library mailing list will give you a lot of insights on what's going on right now. Asking there is a good idea too.

Write a good patch

Follow code style

When writing C code, follow the CODE_STYLE already established in the project. Consistent style makes code easier to read and mistakes less likely to happen. Run make checksrc before you submit anything, to make sure you follow the basic style. That script doesn't verify everything, but if it complains you know you have work to do.

Non-clobbering All Over

When you write new functionality or fix bugs, it is important that you don't fiddle all over the source files and functions. Remember that it is likely that other people have done changes in the same source files as you have and possibly even in the same functions. If you bring completely new functionality, try writing it in a new source file. If you fix bugs, try to fix one bug at a time and send them as separate patches.

Write Separate Changes

It is annoying when you get a huge patch from someone that is said to fix 511 odd problems, but discussions and opinions don't agree with 510 of them - or 509 of them were already fixed in a different way. Then the person merging this change needs to extract the single interesting patch from somewhere within the huge pile of source, and that creates a lot of extra work.

Preferably, each fix that corrects a problem should be in its own patch/commit with its own description/commit message stating exactly what they correct so that all changes can be selectively applied by the maintainer or other interested parties.

Also, separate changes enable bisecting much better for tracking problems and regression in the future.

Patch Against Recent Sources

Please try to get the latest available sources to make your patches against. It makes the lives of the developers so much easier. The very best is if you get the most up-to-date sources from the git repository, but the latest release archive is quite OK as well!

Documentation

Writing docs is dead boring and one of the big problems with many open source projects. But someone's gotta do it! It makes things a lot easier if you submit a small description of your fix or your new features with every contribution so that it can be swiftly added to the package documentation.

The documentation is always made in man pages (nroff formatted) or plain ASCII files. All HTML files on the web site and in the release archives are generated from the nroff/ASCII versions.

Test Cases

Since the introduction of the test suite, we can quickly verify that the main features are working as they're supposed to. To maintain this situation and improve it, all new features and functions that are added need to be tested in the test suite. Every feature that is added should get at least one valid test case that verifies that it works as documented. If every submitter also posts a few test cases, it won't end up as a heavy burden on a single person!

If you don't have test cases or perhaps you have done something that is very hard to write tests for, do explain exactly how you have otherwise tested and verified your changes.

Sharing Your Changes

How to get your changes into the main sources

Ideally you file a pull request on github, but you can also send your plain patch to the curl-library mailing list.

Either way, your change will be reviewed and discussed there and you will be expected to correct flaws pointed out and update accordingly, or the change risks stalling and eventually just getting deleted without action. As a submitter of a change, you are the owner of that change until it has been merged.

Respond on the list or on github about the change and answer questions and/or fix nits/flaws. This is very important. We will take lack of replies as a sign that you're not very anxious to get your patch accepted and we tend to simply drop such changes.

About pull requests

With github it is easy to send a pull request to the curl project to have changes merged.

We prefer pull requests to mailed patches, as it makes it a proper git commit that is easy to merge and they are easy to track and not that easy to loose in the flood of many emails, like they sometimes do on the mailing lists.

When you adjust your pull requests after review, consider squashing the commits so that we can review the full updated version more easily.

Making quality patches

Make the patch against as recent source versions as possible.

If you've followed the tips in this document and your patch still hasn't been incorporated or responded to after some weeks, consider resubmitting it to the list or better yet: change it to a pull request.

Write good commit messages

A short guide to how to write commit messages in the curl project.

---- start ----
[area]: [short line describing the main effect]
       -- empty line --
[full description, no wider than 72 columns that describe as much as
possible as to why this change is made, and possibly what things
it fixes and everything else that is related]
       -- empty line --
[Closes/Fixes #1234 - if this closes or fixes a github issue]
[Bug: URL to source of the report or more related discussion]
[Reported-by: John Doe - credit the reporter]
[whatever-else-by: credit all helpers, finders, doers]
---- stop ----

Don't forget to use commit --author="" if you commit someone else's work, and make sure that you have your own user and email setup correctly in git before you commit

Write Access to git Repository

If you are a very frequent contributor, you may be given push access to the git repository and then you'll be able to push your changes straight into the git repo instead of sending changes as pull requests or by mail as patches.

Just ask if this is what you'd want. You will be required to have posted several high quality patches first, before you can be granted push access.

How To Make a Patch with git

You need to first checkout the repository:

git clone https://github.com/curl/curl.git

You then proceed and edit all the files you like and you commit them to your local repository:

git commit [file]

As usual, group your commits so that you commit all changes at once that constitute a logical change.

Once you have done all your commits and you're happy with what you see, you can make patches out of your changes that are suitable for mailing:

git format-patch remotes/origin/master

This creates files in your local directory named NNNN-[name].patch for each commit.

Now send those patches off to the curl-library list. You can of course opt to do that with the 'git send-email' command.

How To Make a Patch without git

Keep a copy of the unmodified curl sources. Make your changes in a separate source tree. When you think you have something that you want to offer the curl community, use GNU diff to generate patches.

If you have modified a single file, try something like:

diff -u unmodified-file.c my-changed-one.c > my-fixes.diff

If you have modified several files, possibly in different directories, you can use diff recursively:

diff -ur curl-original-dir curl-modified-sources-dir > my-fixes.diff

The GNU diff and GNU patch tools exist for virtually all platforms, including all kinds of Unixes and Windows:

For unix-like operating systems:

For Windows: